Rat Ang-Ⅱ(Angiotensin Ⅱ) ELISA Kit
Ang-II、Angiotensin-2
Price: $ 495
Price: $ 396
Price: $ 150
Price: Inquire
Price: Inquire
- Reactivity: Rat
- Detection Range: 15.63-1000 pg/mL
- Sensitivity: 9.38 pg/mL
For research use only. Order now, ship in 3 days
Test Principle | This ELISA kit uses the Competitive-ELISA principle. The micro ELISA plate provided in this kit has been pre-coated with Rat Ang-Ⅱ. During the reaction, Rat Ang-Ⅱ in the sample or standard competes with a fixed amount of Rat Ang-Ⅱ on the solid phase supporter for sites on the Biotinylated Detection Ab specific to Rat Ang-Ⅱ. Excess conjugate and unbound sample or standard are washed away, and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well and incubated. Then a TMB substrate solution is added to each well. The enzyme-substrate reaction is terminated by the addition of stop solution and the color turns from blue to yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The concentration of Rat Ang-Ⅱ in tested samples can be calculated by comparing the OD of the samples to the standard curve. |
Assay Type | Competitive-ELISA |
size | 96T / 48T / 24T / 96T*10 / 96T*5 |
Assay Time | 2.5h |
Detection Method | Colormetric |
Detection Range | 15.63-1000 pg/mL |
Sensitivity | 9.38 pg/mL |
Sample Volume | 50μL |
Sample Type | serum, plasma and other biological fluids |
Specificity | This kit recognizes Rat Ang-Ⅱ in samples.No significant cross-reactivity or interference between Rat Ang-Ⅱ and analogues was observed |
Precision | Both intra-CV and inter-CV are < 10%. |
Recovery | 80%-120% |
Introduction | This ELISA kit applies to the in vitro quantitative determination of Rat Ang-Ⅱ concentrations in serum, plasma and other biological fluids. |
Applications | ELISA |
Storage | 2-8℃/-20℃ |
Database | SwissProt: P01015(Angiotensinogen 25 – 32) |
Syonoyms | Ang-II,Angiotensin-2 |
Research Area | Cancer , Cardiovascular , Metabolism , Signal Transduction |
-
Controlled Hemorrhage Sensitizes Angiotensin II-Elicited Hypertension through Activation of the Brain Renin-Angiotensin System Independently of Endoplasmic Reticulum Stress
IF:6.543
Journal:Oxidative Medicine and Cellular Longevity
PMID:35069977
-
Azithromycin Mitigates Cisplatin-Induced Lung Oxidative Stress, Inflammation and Necroptosis by Upregulating SIRT1, PPARγ, and Nrf2/HO-1 Signaling
IF:5.215
Journal:Pharmaceuticals
-
Targeting inflammation and redox aberrations by perindopril attenuates methotrexate-induced intestinal injury in rats: Role of TLR4/NF-κB and c-Fos/c-Jun pro-inflammatory pathways and PPAR-γ/SIRT1 cytoprotective signals
IF:5.194
Journal:CHEMICO-BIOLOGICAL INTERACTIONS
PMID:34737150
-
Treatment with β-blocker nebivolol ameliorates oxidative stress and endothelial dysfunction in tenofovir-induced nephrotoxicity in rats.
IF:5.058
Journal:Frontiers in Medicine
-
CIHH protects the heart against left ventricular remodelling and myocardial fibrosis by balancing the renin-angiotensin system in SHR
IF:5.037
Journal:LIFE SCIENCES
PMID:33930369
-
Chronic Intermittent Hypobaric Hypoxia Decreases High Blood Pressure by Stabilizing the Vascular Renin-Angiotensin System in Spontaneously Hypertensive Rats
IF:4.566
Journal:Frontiers in Physiology
-
COPD rat model is more susceptible to cold stress and PM2.5 exposure and the underlying mechanism
IF:4.358
Journal:ENVIRONMENTAL POLLUTION
-
Perindopril Improves Cardiac Function by Enhancing the Expression of SIRT3 and PGC-1α in a Rat Model of Isoproterenol-Induced Cardiomyopathy
IF:4.225
Journal:Frontiers in Pharmacology
PMID:32153406
-
Adjunctive therapy with statins reduces residual albuminuria/proteinuria and provides further renoprotection by downregulating the angiotensin II–AT1 pathway in hypertensive nephropathy
IF:4.085
Journal:JOURNAL OF HYPERTENSION
-
Effect of Telmisartan on Arsenic-Induced (Sub-chronic) Perturbations in Redox Homeostasis, Pro-inflammatory Cascade and Aortic Dysfunction in Wistar Rats
IF:3.738
Journal:BIOLOGICAL TRACE ELEMENT RESEARCH
DOI:10.1007/s12011-021-02804-0
PMID:34339004
-
Q1:What is the use of aluminum foil bag and plate sealer in the kit?
In addition to the aluminum foil bag that has been vacuum-sealed, an empty aluminum foil bag will be included with the kit. Customers can seal and store the removed aluminum foil strip in a new aluminum foil bag and store the components according to the instructions. The plate sealer is a sticky film used to seal the plate holes in the incubation stage, which can control and reduce the evaporation of water in the incubation stage and better maintain the uniform heating of the whole plate, minimizing the influence of edge effect on the test results.
-
Q2:What are the specifications of ELISA Kit?
There are four specifications of 96T/48T/24T/96T*5. Among them, 24T is the trial size.
-
Q3:Why do we recommend pre-testing? How to conduct a pre-experiment?
The purpose of the pre-test is: ① to determine whether the kit is suitable for your sample detection, so as to avoid the waste of kits and samples; ② To help you get familiar with the operating process of the kit, especially the customers who use the ELISA kit for the first time/change the experimental brand; ③ Determine whether the sample is diluted or not and whether the dilution ratio is suitable for the determination of this kit and confirm the optimal sample dilution information; ④ Help to understand the experimental phenomena or problems that may occur during the experiment, so as to make timely adjustments; Specific methods: Before the formal test, 2-3 samples with large differences are selected to dilute the samples with different concentrations, and then pre-test is conducted according to the experimental procedures in the instructions. According to the results of the pre-test, the optimal dilution ratio of the samples is determined combined with the detection range of the kit.
-
Q4:Does ELISA require technical replication? How to set the positive or negative control?
It is recommended that customers do technical repetition, on the one hand can confirm the operation method, on the other hand can verify and improve the accuracy of the experimental results. A positive control in an ELISA test can be considered the standard product. Negative control is a blank matrix or a matrix solution with known low concentration that has homology and homogeneity with the object to be picked up, which is generally difficult to obtain, and can be set as a negative control if available. The routine is to set a blank control, that is, a sample diluent.
-
Q5:What species can the ELISA Kit detect?
At present, the species detected by our ELISA kit are mainly human, mouse, rat and a small number of targets involve special species such as monkey, rabbit, pig and chicken. Kits with the name of a particular species (such as human) are specific to that species. If no species is specified in the manual, the kit is generic within the conventional universal species. If the species tested is special, it is recommended to confirm the suitability of the sample with technical support first.
-
Q6:Why should a product with two item numbers of a target test different sample types?
Different sample types of matrix are different, in order to reduce the influence of the matrix itself and improve the accuracy of routine sample measurement, usually set different systems of ELISA kits, and display with different product numbers. In addition, the concentration of some indicators varies greatly between different samples, so different products are used to meet customers' needs for ease of operation.
-
Q7:How to operate the "repeated freeze-thaw" process mentioned in tissue or cell sample processing?
Tissue sample: After finishing tissue grinding, place it at -80℃ for 1h/ liquid nitrogen for 0.5h, and then gently shake it in a water bath at 30℃ to melt it quickly. Repeat this operation 1-2 times. Cell sample: Repeat the above freeze-thaw operation 2-3 times. If it is a membrane protein, it can be appropriately sonicated, but the temperature and frequency of ultrasound need to be controlled. It is recommended to add protease inhibitors to the sample in advance. PMSF(Cat.E-EL-SR002) is generally recommended.
-
Q8:Can the standard curve in the manual be used directly for calculation?
The standard curve on the manual is an indicator curve, mainly used to show the shape of the standard curve after fitting and the quality control range of the highest/lowest OD value, you can not directly use. In addition, due to the influence of experimental operation, experimental environment, instrument parameter setting and other factors, the OD value of your actual standard curve may not be completely consistent with the instructions (overall high or low). In this case, it is recommended to control the first 4 blue wells in the color development stage with obvious color gradient and the maximum OD value of the standard curve above 1.2. If the correlation coefficient of the standard tune is above 0.99, it can be used as an effective standard curve.
-
Q9:How can I tell if my sample needs to be diluted or processed?
The detection range of the kit is not the same as the concentration range of the substance to be measured in the sample. It is recommended to estimate the concentration of the substance to be measured in the sample through relevant literature before the experiment and determine the actual concentration of the sample through pre-experiment. If it is a routine sample type, you can consult ELISA technical support to obtain the recommended dilution of the sample and schedule pre-laboratory testing. If the concentration of the substance to be measured in the sample is too high or too low, dilute or concentrate the sample appropriately. If the concentration of analyte in the sample is much lower than the minimum detection line of the kit, it is recommended to choose a kit with higher sensitivity for detection.
-
Q10:The sample/reagent volume is not enough, can I reduce the sample volume uniformly?
Neither can be reduced. The sample volume of each step should be strictly in accordance with the instructions, otherwise the experimental system will be changed, and the results will be inaccurate. If the customer really does not have enough sample volume, you can consult the technology to confirm whether the sample can be diluted, and judge the sample concentration through pre-experiment Degree situation. If the volume of the reagent is not enough, the number of holes to be tested can only be reduced according to the actual volume, and the detection can not be diluted.