Click here to view cell apoptosis assay products

Recombinant VEGF Receptor 1 Monoclonal Antibody

Uniprot : P17948
  • Cat.No.:E-AB-81493

  • Host: Rabbit
  • Reactivity: H,M,R
  • Applications: WB,IHC-P

To Purchase E-AB-81493

Size:
  • 50μL
  • 100μL
Price: $160
Qty:

Test Application

  • Verified Samples

    Reactivity Application
    Human WB
    (K562,Hela,)

    Western blot detection of VEGF Receptor 1 in K562,C6,3T3,Hela cell lysates using VEGF Receptor 1 Rabbit mAb(1:1000 diluted).Predicted band size:151kDa.Observed band size:180kDa.

    Western blot detection of VEGF Receptor 1 in K562,C6,3T3,Hela cell lysates using VEGF Receptor 1 Rabbit mAb(1:1000 diluted).Predicted band size:151kDa.Observed band size:180kDa.

    IHC
    (colon cancer,)

    Immunohistochemistry of VEGF Receptor 1 in paraffin-embedded Human colon cancer tissue using VEGF Receptor 1 Rabbit mAb at dilution 1:50

    Rat WB
    (C6,)

    Western blot detection of VEGF Receptor 1 in K562,C6,3T3,Hela cell lysates using VEGF Receptor 1 Rabbit mAb(1:1000 diluted).Predicted band size:151kDa.Observed band size:180kDa.

    Mouse WB
    (3T3,)

    Western blot detection of VEGF Receptor 1 in K562,C6,3T3,Hela cell lysates using VEGF Receptor 1 Rabbit mAb(1:1000 diluted).Predicted band size:151kDa.Observed band size:180kDa.

  • Dilution

    WB 1:500-1:1000
    IHC 1:50-1:100

Preparation of protein samples

1.Protein extraction

1)For tissue sample
a. Take the samples, wash the tissue thoroughly with pre-cooled PBS (0.01 M, pH=7.4)(Cat# E-BC-R187) to remove the surface blood and internal debris.
b. Weigh and smash the tissue, add an appropriate ratio of RIPA Lysis Buffer (Cat# E-BC-R327)(add 10 μL PMSF and 10 μL Na3VO4 to each 1 mL RIPA Lysis) and homogenizely lyse the tissue.
It is recommended to homogenize according to the ratio of tissue weight: RIPA volume = 3:10. For example, add 1 mL RIPA Lysis Buffer to 0.3 g tissue sample, the specific volume can be adjusted according to experimental requirements.
c. Shake and lyse on the ice for 30 min after homogenization. And then sonicate the sample for 1 min (under ice water bath conditions) with 2 s’ sonication and 2 s’ intervals to make cells fully lysis and reduce the viscosity of sample.
d. Centrifuge at 12,000 rpm for 10 min at 4℃.
e. Take the supernatant and measure the protein concentration mentioned in step2.

2)For cell sample
a. Collect the cells, wash them thoroughly with pre-cooled PBS (0.01 M, pH=7.4) to remove the medium off (it is generally recommended to wash 3 times).
b. Add an appropriate ratio of RIPA Lysate Buffer (10 μL PMSF and 10 μL Na3VO4 in each 1 mL RIPA Lysis) and lyse on the ice for 30 min.
It is recommended to add 0.1 mL of RIPA Lysis Buffer to each well of a 6-well plates (the protein content in different cells may vary, and the volume of the lysate added can be appropriately adjusted).
c. Sonicate the sample for 1 min (under ice water bath conditions) with 2 s’ sonication and 2 s’ intervals to make cells fully lyse and reduce viscosity of sample.
d. Centrifuge at 12,000 rpm for 10 min at 4℃.
e. Take the supernatant and measure the protein concentration mentioned in step2.

2.Measurement of protein concentration
By the BCA method (see the Total Protein Colorimetric Assay Kit (Cat# E-BC-K318) instructions).

3.Boiling the samples
Adjust the protein concentration with PBS Buffer. Add 5 × SDS Loading Buffer (Cat# E-BC-R288) with the ratio of the protein sample: 5 × SDS Loading Buffer = 4:1 and boil the mixture for 10 min. Centrifuge at 12,000 rpm for 2 min and collect the supernatant. The denatured protein can be employed to Western Blot experiments or stored at -20℃ or -80℃.

Note: It is recommended that the total protein loading amount of test sample is about 50 μg in each well. Try to make the loading volume of each sample close to 10 μL.

Electrophoresis

1.According to the molecular weight of the target protein, prepare 0% separation gel. Add the test sample to each well, and add 5 μL of Pre-stained Protein Marker (Cat# E-BC-R273)to a reserved well in order to verify the target molecular weight and the extent of membrane transfer. Add Electrophoresis Buffer ( Cat# E-BC-R331) and start electrophoresis.

2.Electrophoresis at 80v when the samples are in stacking gel, then convert to 120v when the blue flow into the separating gel. Electrophoresis time is about 2-3 h till bromophenol blue reaches the bottom of the gel.

Transfer Membrane

1.Choose the PVDF Membrane (Cat# E-BC-R266) with a pore size of μm according to the molecular weight of the target protein. Soak the PVDF Membrane in methanol for 1 min to activate it, and then soak the PVDF Membrane in the Transmembrane Buffer (Cat# E-BC-R333), the filter paper and fiber mat must be soaked in the Transmembrane Buffer for use too.

2.Follow manufacture instructions of Transfer System for wet, semi-dry, or dry transfer.

Incubation of antibodies

1.Soak the PVDF Membrane with TBST Buffer (Cat# E-BC-R335) containing 5% Skim Milk Powder as blocking buffer and block the membrane at room temperature for .

2.According to the recommended primary antibody dilution ratio, use the TBST Buffer containing 5% Skim Milk Powder to dilute the VEGF Receptor 1 Antibody at , soak the PVDF Membrane in the primary antibody working solution, incubate overnight at 4 ℃, and gently shake.

3.Wash the PVDF Membrane with TBST Buffer for .

4.According to the recommended secondary antibody dilution ratio, use a TBST Buffer solution containing 2% Skim Milk Powder to dilute Goat Anti-Rabbit IgG (H+L) (peroxidase/HRP conjugated) (Cat# E-AB-1003) at . Incubate at room temperature for 1 h on a shaker.

5.Wash the PVDF Membrane with TBST Buffer for .

Detection

1.Mix A and B in the Excellent Chemiluminescent Substrate Detection kit (Cat# E-BC-R347) at the ratio of 1:1 as working solution.

2.Take out the PVDF Membrane from TBST Buffer and absorb the liquid with the filter paper. Pave the PVDF Membrane on the detection machine, add ECL working solution continuously on the PVDF Membrane, discharge the bubble and detect the result.

3.Adjust the contrast and the exposure time to get the best image.

Appendix

Product Details

Clonality Rabbit Monoclonal
Isotype IgG
Concentration 300 μg/mL
Storage Store at -20℃. Avoid freeze / thaw cycles.
Buffer 50mM Tris-Glycine(pH 7.4), 0.15M NaCl, 40% Glycerol, 0.01% Sodium azide and 0.05% protective protein
Purification Method Affinity Purified
Research Areas Cancer, Cardiovascular, Metabolism, Signal Transduction
Clone No. R06-1A4
Conjugation Unconjugated

Immunogen Details

Immunogen A synthetic peptide of human VEGF Receptor 1
Abbre VEGF Receptor 1
Synonyms EC 2.7.10.1,FLT 1,FLT,Flt-1,FLT1,Fms like tyrosine kinase 1,Fms related tyrosine kinase 1,Fms related tyrosine kinase 1 (vascular endothelial growth factor/vascular permeability factor receptor),Fms related tyrosine kinase 1 vascular endothelial growth factor/vascular permeability factor receptor,Fms-like tyrosine kinase 1,FRT,Soluble VEGF receptor 1 14,Soluble VEGFR1 variant 2,Soluble VEGFR1 variant 21,Tyrosine protein kinase FRT,Tyrosine protein kinase receptor FLT,Tyrosine-protein kinase FRT,Tyrosine-protein kinase receptor FLT,Vascular endothelial growth factor receptor 1,Vascular endothelial growth factor vascular permeability factor receptor,Vascular permeability factor receptor 1,Vascular permeability factor receptor,VEGFR 1,VEGFR-1,VEGFR1,VGFR1,Recombinant Rabbit mAb,Recombinant Rabbit Monoclonal Antibody
Swissprot P17948
Gene ID 2321
Calculated MW 151kDa
Observed MW 180kDa

Western blotting is a method for detecting a certain protein in a complex sample based on the specific binding of antigen and antibody. Different proteins can be divided into bands based on different mobility rates. The mobility is affected by many factors, which may cause the observed band size to be inconsistent with the expected size. The common factors include:

1. Post-translational modifications: For example, modifications such as glycosylation, phosphorylation, methylation, and acetylation will increase the molecular weight of the protein.

2. Splicing variants: Different expression patterns of various mRNA splicing bodies may produce proteins of different sizes.

3. Post-translational cleavage: Many proteins are first synthesized into precursor proteins and then cleaved to form active forms, such as COL1A1.

4. Relative charge: the composition of amino acids (the proportion of charged amino acids and uncharged amino acids).

5. Formation of multimers: For example, in protein dimer, strong interactions between proteins can cause the bands to be larger. However, the use of reducing conditions can usually avoid the formation of multimers.

If a protein in a sample has different modified forms at the same time, multiple bands may be detected on the membrane.

Cellular Localization Secreted and Cell membrane.

Background

This gene encodes a member of the vascular endothelial growth factor receptor (VEGFR) family. VEGFR family members are receptor tyrosine kinases (RTKs) which contain an extracellular ligand-binding region with seven immunoglobulin (Ig)-like domains, a transmembrane segment, and a tyrosine kinase (TK) domain within the cytoplasmic domain. This protein binds to VEGFR-A, VEGFR-B and placental growth factor and plays an important role in angiogenesis and vasculogenesis. Expression of this receptor is found in vascular endothelial cells, placental trophoblast cells and peripheral blood monocytes. Multiple transcript variants encoding different isoforms have been found for this gene. Isoforms include a full-length transmembrane receptor isoform and shortened, soluble isoforms. The soluble isoforms are associated with the onset of pre-eclampsia.

Reviews/Q&A

  • Show all
  • Reviews
  • Q&A
... Show All Show Less

People Also Bought

Apply for 10 Test Free Trial FCM Antibody
*Product Name:
*Catalog Number:
*Name:
*Email:
*Message:
*Country:
*When will you use it?

*Captcha: