In the fields of immune cell research, tumor immunology, inflammation mechanisms, and cell therapy development, the precise separation and purification of CD4+ T cells is the critical first step for all downstream experiments. Separation purity, cell viability, and ease of operation directly determine the stability and reliability of experimental data.
To cover more experimental scenarios in T cell isolation and meet the need for precise targeted separation, Elabscience® has launched new magnetic beads for CD4 positive selection, building on its well-established CD4 negative selection kit. This allows negative and positive selection protocols to be run in parallel, fully adapting to different scientific research logic and downstream applications, and helping researchers choose the right approach flexibly and conduct experiments efficiently.
Table of Contents
1. Precise differentiation: positive selection vs. negative selection for optimal cell separation
2. Core highlights of the new product: adapting to diverse T cell research scenarios
3. Continuous expansion of the separation product matrix: upcoming positive selection products
01 Precise differentiation: positive selection vs. negative selection for optimal cell separation
Many researchers often find themselves confused during experiments: When it comes to CD4 separation, should they choose negative selection or positive selection? Neither is superior to the other; they simply differ in their applicable scenarios.
1.1 Negative Selection Kit (Classic Version, Already Stably Launched)
● Core Principle: Through specific antibody labeling, all contaminating cells that are not the target, such as CD8, CD19, CD14, and others, are removed, ultimately retaining unlabeled CD4+ T cells in their native state.
● Core Advantages: The target cells are never touched throughout the entire process. After separation, the CD4+ T cells carry no antibody or magnetic bead residues, maximally preserving the cells' native viability and surface antigen integrity. This makes it extremely suitable for experimental scenarios with extremely high demands on cell status, such as functional activation of cells, proliferation, cytokine secretion, and culture over the long term, effectively avoiding cell activation interference caused by the separation procedure.
1.2 Positive Selection Kit (Newly Launched, Scenario Complement)
● Core Principle: Target CD4+ T cells in the sample are specifically labeled, and the target cells are specifically captured via magnetic beads. After washing away contaminating cells, highly purified target cells are obtained. This is the core approach for precise targeted separation.
● Core Advantages: Extremely strong targeting specificity, high enrichment efficiency, and excellent cell recovery. It is particularly suitable for experimental systems with low initial sample cell numbers and low target cell proportions, perfectly addressing the pain points of negative selection, such as the ease of cell loss and fluctuations in purity when samples contain only a low abundance of cells. The separated cells can directly meet the needs of downstream experiments including flow cytometry, gene sequencing, single cell analysis, and subcellular sorting.
02 Core highlights of the new product: adapting to diverse T cell research scenarios
The newly launched CD4 positive selection magnetic beads continue the high standard of quality control maintained across the entire product line, balancing stability, convenience, and compatibility, and are suitable for the vast majority of basic and translational research scenarios:
(1) High Purity and High Viability: Specific separation ensures that cell purity consistently meets standards while minimizing the loss of cell viability, ensuring authentic and reliable downstream experimental data.
(2) Strong Adaptability to Low Sample Input: Optimized for various sample types including peripheral blood and tissue single cell suspensions. Even samples with a low abundance of CD4+ T cells can be efficiently enriched.
(3) Efficient and Convenient Operation: Magnetic beads with directly conjugated antibodies require no cumbersome experimental steps, featuring short processing time and high reproducibility, suitable for batch sample processing needs.
(4) Broad Compatibility: Separated cells can seamlessly interface with various downstream research applications such as transcriptome sequencing, protein analysis, cell function validation, and in vitro stimulation experiments.
Product Contents:
This product series mainly includes the following (positive selection magnetic beads and supporting consumables):
Table 1. Product Components of EasySort™ Mouse CD4 Nanobeads Kit
|
Cat. No. |
Product Name |
Specification |
Storage |
|
MIM011P |
EasySort™ Mouse CD4 Nanobeads |
10 Assays /200 Assays |
2-8℃ |
|
EC007 |
EasySort™ LS Columns |
5 Units /25 Units |
Room Temperature |
|
EC010 |
EasySort™ MS Columns |
5 Units /25 Units |
Room Temperature |
Product Performance Display:

Fig. 1 Compatibility testing of magnetic beads for CD4 positive selection in different sample systems. As shown in the figure, when EasySort™ Mouse CD4 Nanobeads were used to separate spleen and lymph node samples from C57 and Balb/c mice, both yielded CD4+ T cells of high purity.

Fig. 2 Titration testing of EasySort™ Mouse CD4 Nanobeads. Using a single cell suspension prepared from C57 mouse spleen, the cell density was adjusted to 1×10⁷/mL, and magnetic beads were used at 1, 0.5, 0.25, and 0.1 Test to separate CD4+ T cells. The proportion and purity of CD4+ T cells were measured both in the target cells (upper row) and in the flow through (lower row). The results show that the kit performs well in dilution titration. Within the range of 0.25 to 1 Test, the purity of the separated CD4+ T cells ranged from 92% to 95%, with extremely low residual target cells in the flow through.

Fig. 3 Viability testing of CD4+ T cells separated by EasySort™ Mouse CD4 Nanobeads. A single cell suspension prepared from C57 mouse spleen was used for CD4+ T cell separation with EasySort™ Mouse CD4 Nanobeads. After activation and culture for 48 h with Mouse CD3/CD28 T Cell Activation Beads (MIM001A), cell pellets were collected and the activation markers CD25 and CD69 were detected. As shown in the figure, compared with the non activated control group (left), the CD4+ T cells separated by EasySort™ Mouse CD4 Nanobeads showed excellent cell status (right), and after activation with CD3/CD28 activation beads, the T cell activation markers CD69 and CD25 were expressed at significantly high levels.

Fig. 4 Quality control testing across batches of EasySort™ Mouse CD4 Nanobeads. Three randomly selected batches of EasySort™ Mouse CD4 Nanobeads were used to separate CD4+ T cells, and the proportions of target cells (upper row) and residual CD4+ T cells in the flow through (lower row) were detected and analyzed. As shown in the figure, different batches of EasySort™ Mouse CD4 Nanobeads showed highly consistent separation performance. The purity of the separated CD4+ T cells was consistently above 93%, and the residual CD4+ T cells in the flow through were consistently below 0.3%.

Fig. 5 Stability testing of EasySort™ Mouse CD4 Nanobeads under 37°C thermal acceleration for 7 and 14 days. As shown in the figure, CD4+ T cells separated using EasySort™ Mouse CD4 Nanobeads that had been stored under thermal acceleration at 37°C for 7 and 14 days showed high purity of target cells and few residual cells in the flow through, compared with the positive control group stored at 2 to 8°C, demonstrating stable kit performance.

Fig. 6 Stability testing of EasySort™ Mouse CD4 Nanobeads under high temperature stress at 45°C. As shown in the figure, CD4+ T cells separated using EasySort™ Mouse CD4 Nanobeads that had been treated at 45°C for 1, 2, 3, and 7 days showed high purity of target cells and few residual cells in the flow through, compared with the positive control group stored at 2 to 8°C. The kit maintained stable performance even after 7 days of high temperature stress treatment at 45°C.
03 Continuous expansion of the separation product matrix: upcoming positive selection products
The launch of this kit for CD4 positive selection marks an important step in improving Elabscience® T cell separation product system. Previously, Elabscience® negative selection product line had already met the need for cell separation that leaves cells trace free, in a native state, and highly viable; now, with the launch of the new positive selection products, Elabscience® has filled experimental gaps in high enrichment, high recovery, and adaptability to low sample input.
Going forward, Elabscience® will continue to expand its product portfolio, successively launching multiple positive selection kits such as CD8, CD45, B220, and CD11b, comprehensively covering mainstream T cell subset separation scenarios and achieving full coverage of both "negative selection + positive selection" solutions, so that scientific research scenarios with different experimental needs and different sample conditions can all be matched with the optimal separation solution. If you have questions about cell separation and in vitro culture protocols, requests for product trials, Elabscience® welcomes you to leave a message in the comments section or contact the official Elabscience® account.
Attachment: Other cell separation products are listed in the table below.
Table 2. List of Other Available Cell Separation Products
|
Product Name |
Cat. No. |
|
Human PBMC Separation Solution (P 1.077) |
E-CK-A103 |
|
Human CD3/CD28 T Cell Activation Beads |
MIH001A |
|
Mouse CD3/CD28 T Cell Activation Beads |
MIM001A |
|
CFSE Cell Division Tracker Kit |
E-CK-A345 |
|
EasySort™ Human CD3+T Cell Isolation Kit |
MIH001N |
|
EasySort™ Human CD4+ T Cell Isolation Kit |
MIH002N |
|
EasySort™ Human CD8+ T Cell Isolation Kit |
MIH003N |
|
EasySort™ Human B Cell Isolation Kit |
MIH004N |
|
EasySort™ Mouse CD3+T Cell Isolation Kit |
MIM001N |
|
EasySort™ Mouse CD4+T Cell Isolation Kit |
MIM002N |
|
EasySort™ Mouse CD8+T Cell Isolation Kit |
MIM003N |
|
EasySort™ Mouse B Cell Isolation Kit |
MIM004N |
|
EasySort™ Mouse NK Cell Isolation Kit |
MIM005N |
|
EasySort™ Human Naïve Pan T Cell Isolation Kit |
MIH006N |
|
EasySort™ Human Naïve CD4+T Cell Isolation Kit |
MIH007N |
|
EasySort™ Human Naïve CD8+T Cell Isolation Kit |
MIH008N |
|
EasySort™ Mouse Pan-Naïve T Cell Isolation Kit |
MIM006N |
|
EasySort™ Mouse Naïve CD4+T Cell Isolation Kit |
MIM007N |
|
EasySort™ Mouse Naïve CD8+T Cell Isolation Kit |
MIM008N |
|
EasySort™ Human Memory CD4+T Cell Isolation Kit |
MIH009N |
|
EasySort™ Human Memory CD8+T Cell Isolation Kit |
MIH010N |

