Current Position:Home>>Kits>>ELISA Kits>> Porcine PF4(Platelet Factor 4) ELISA Kit

Porcine PF4(Platelet Factor 4) ELISA Kit

Uniprot : P30034

Cat.No.:E-EL-P2005
Reactivity: Porcine

Filter:

ELISA

To Purchase E-EL-P2005

Size:

96T
48T
24T
96T*5
96T*10

Price: $682

Qty:

Welcome to order from local distributors.

Protocols for ELISA

FAQ for ELISA

Have Questions?

Add to cart Bulk request

For research use only. Order now, ship in 3 days

Product Details

Properties

Assay type	Sandwich-ELISA
Format	48T/96T/96
Assay time	3.5h
Detection range	1.56-100 ng/mL
Sensitivity	0.94 ng/mL
Sample type &Sample volume	; 100μL
Specificity	This kit recognizes Porcine PF4 in samples. No significant cross-reactivity or interference between Porcine PF4 and analogues was observed.
Reproducibility	Both intra-CV and inter-CV are < 10%.
Application	This ELISA kit applies to the in vitro quantitative determination of Porcine PF4 concentrations in .

Test Principle

This ELISA kit uses the Sandwich-ELISA principle. The micro ELISA plate provided in this kit has been pre-coated with an antibody specific to Porcine PF4. Standards or samples are added to the micro ELISA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Porcine PF4 and Avidin-Horseradish Peroxidase (HRP) conjugate are added successively to each micro plate well and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Porcine PF4, biotinylated detection antibody and Avidin-HRP conjugate will appear blue in color. The enzyme-substrate reaction is terminated by the addition of stop solution and the color turns yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The OD value is proportional to the concentration of Porcine PF4. You can calculate the concentration of Porcine PF4 in the samples by comparing the OD of the samples to the standard curve.

Kit components & Storage

An unopened kit can be stored at 2-8℃ for 1 month. If the kit is not supposed to be used within 1 month, store the components separately according to the following conditions once the kit is received.

Item	Specifications	Storage
Micro ELISA Plate(Dismountable)	96T: 8 wells ×12 strips 48T: 8 wells ×6 strips	-20℃, 12 months
Reference Standard	96T: 2 vials 48T: 1 vial
Concentrated Biotinylated Detection Ab (100×)	96T: 1 vial, 120 μL 48T: 1 vial, 60 μL
Concentrated HRP Conjugate (100×)	96T: 1 vial, 120 μL 48T: 1 vial, 60 μL	-20℃(Protect from light), 12 months
Reference Standard & Sample Diluent	1 vial, 20 mL	2-8°C, 12 months
Biotinylated Detection Ab Diluent	1 vial, 14 mL
HRP Conjugate Diluent	1 vial, 14 mL
Concentrated Wash Buffer (25×)	1 vial, 30 mL
Substrate Reagent	1 vial, 10 mL	2-8℃(Protect from light)
Stop Solution	1 vial, 10 mL	2-8°C
Plate Sealer	5 pieces
Manual	1 copy
Certificate of Analysis	1 copy

Technical Data

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Porcine PF4 were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Porcine PF4 were tested on 3 different plates, 20 replicates in each plate.

	Intra-assay Precision			Inter-assay Precision
Sample	1	2	3	1	2	3
n	20	20	20	20	20	20
Mean (ng/mL)	4.62	12.62	45.00	5.04	13.51	43.80
Standard deviation	0.29	0.72	1.59	0.32	0.64	2.09
CV (%)	6.28	5.71	3.53	6.35	4.74	4.77

Recovery

The recovery of Porcine PF4 spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.

Sample Type	Range (%)	Average Recovery (%)
Serum(n=8)	91-103	97
EDTA plasma (n=8)	88-101	93
Cell culture media (n=8)	95-107	101

Linearity

Samples were spiked with high concentrations of Porcine PF4 and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.

Target Information

Database Links	SwissProt: P30034
Research Area	Cancer, Cardiovascular, Immunology

Assay Procedures

	1. Add 100μL standard or sample to the wells. Incubate for 90 min at 37°C
	2. Discard the liquid, immediately add 100μL Biotinylated Detection Ab working solution to each well. Incubate for 60 min at 37°C
	3. Aspirate and wash the plate for 3 times
	4. Add 100μL HRP conjugate working solution. Incubate for 30 min at 37°C. Aspirate and wash the plate for 5 times
	5. Add 90μL Substrate Reagent. Incubate for 15 min at 37°C
	6. Add 50μL Stop Solution
	7. Read the plate at 450nm immediately. Calculation of the results

Reviews/Q&A

Show all
Reviews
Q&A

... Show All Show Less

*Product Name:
*Catalog Number:
Size:
*Name:
*Email:
*Phone:
*Message:
*Country:
*When will you use it?	Within 1 month In 2 to 3 month In 4 to 6 month 6 months later
*Captcha:	Click to load Captcha