×

Mouse MMP-8 (Matrix Metalloproteinase 8) CLIA Kit

  • Cat.No.:E-CL-M0495

  • Reactivity: Mouse

To Purchase E-CL-M0495

Size:
  • 96T
  • 48T
  • 24T
  • 96T*5
  • 96T*10
Price: $682
Qty:

Product Details

Properties

Assay type Sandwich-CLIA
Format 96T/48T
Assay time 3.5h
Detection range 62.50-4000 pg/mL
Sensitivity 37.50 pg/mL
Sample type &Sample volume serum, plasma and other biological fluids; 100μL
Specificity This kit recognizes Mouse MMP-8 in samples. No significant cross-reactivity or interference between Mouse MMP-8 and analogues was observed.
Reproducibility Both intra-CV and inter-CV are < 15%.
Application This CLIA kit applies to the in vitro quantitative determination of Mouse MMP-8 concentrations in serum, plasma and other biological fluids.

Test Principle

This CLIA kit uses the Sandwich-CLIA principle. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Mouse MMP-8. Standards or samples are added to the micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Mouse MMP-8 and Avidin-Horseradish Peroxidase (HRP) conjugate are added successively to each micro plate well and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Mouse MMP-8, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Mouse MMP-8. You can calculate the concentration of Mouse MMP-8 in the samples by comparing the RLU value of the samples to the standard curve.

Kit components & Storage

An unopened kit can be stored at 2-8℃ for 1 month. If the kit is not supposed to be used within 1 month, store the components separately according to the following conditions once the kit is received.
ItemSpecificationsStorage
Micro CLIA Plate(Dismountable) 96T: 8 wells ×12 strips
48T: 8 wells ×6 strips
-20℃, 6 months
Reference Standard 96T: 2 vials
48T: 1 vial
Concentrated Biotinylated Detection Ab (100×) 96T: 1 vial, 120 μL
48T: 1 vial, 60 μL
Concentrated HRP Conjugate (100×) 96T: 1 vial, 120 μL
48T: 1 vial, 60 μL
-20℃(Protect from light), 6 months
Reference Standard & Sample Diluent 1 vial, 20 mL 2-8°C, 6 months
Biotinylated Detection Ab Diluent 1 vial, 14 mL
HRP Conjugate Diluent 1 vial, 14 mL
Concentrated Wash Buffer (25×) 1 vial, 30 mL
Substrate Reagent A 1 vial, 5 mL 2-8℃(Protect from light)
Substrate Reagent B 1 vial, 5 mL
Plate Sealer 5 pieces
Manual 1 copy
Certificate of Analysis 1 copy

Technical Data

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Mouse MMP-8 were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Mouse MMP-8 were tested on 3 different plates, 20 replicates in each plate.

  Intra-assay Precision Inter-assay Precision
Sample 1 2 3 1 2 3
n 20 20 20 20 20 20
Mean (pg/mL) 211.84 529.08 1759.27 214.68 558.78 1698.12
Standard deviation 26.71 61.43 116.82 18.87 59.12 118.36
CV (%) 12.61 11.61 6.64 8.79 10.58 6.97

Recovery

The recovery of Mouse MMP-8 spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.

Sample Type Range (%) Average Recovery (%)
Serum(n=8) 98-113 104
EDTA plasma(n=8) 86-100 93
Cell culture media(n=8) 90-102 97

Linearity

Samples were spiked with high concentrations of Mouse MMP-8 and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.

Target Information

SynonymsMMP8, CLG1, HNC, PMNL-CL, Neutrophil Collagenase

Assay Procedures

elisa assay procedure 1

1.Add 100 μL of standard or sample to each well. Incubate for 90 min at 37℃.

elisa assay procedure 2

2.Remove the liquid.

elisa assay procedure 3

3.Add 100 μL Biotinylated Detection Ab. Incubate 1 hour at 37℃. Aspirate and wash 3 times.

elisa assay procedure 4

4.Add 100 μL HRP Conjugate. Incubate 30 min at 37℃. Aspirate and wash 5 times.

elisa assay procedure 5

5.Add 100 μL Substrate Mixture Solution. Incubate for 5 min at 37℃.

elisa assay procedure 6

6.Fluorescence appeared. Measure the RLU value with the Chemiluminescence immunoassay analyzer. Calculation of the results.

Related Products

Elabscience® provides ancillary reagents required for ELISA kit developments.11 reagents in total, including reagents for coating, blocking, washing, improving the stability and reducing matrix interference etc.
Cat.No. Product Name Specifications
E-ELIR-001 ELISA Plate Coating Buffer(1×) 100mL, 1000mL
E-ELIR-002 ELISA Plate Coating Buffer(5×) 100mL, 1000mL
E-ELIR-003 ELISA Plate Blocking Buffer 100mL, 1000mL
E-ELIR-004 Wash Buffer for Sandwich-ELISA(25×) 100mL, 1000mL
E-ELIR-005 Wash Buffer for Competitive-ELISA(25×) 100mL, 1000mL
E-ELIR-006 Stop Solution 100mL, 1000mL
E-ELIR-007 HRP-conjugate Stabilizer 10mL, 100mL, 500mL
E-ELIR-008 HRP-conjugate Diluent 100mL, 1000mL
E-ELIR-009 Biotinylated Antibody Stabilizer 10mL, 100mL, 500mL
E-ELIR-0010 Biotinylated Antibody Diluent 10mL, 100mL, 500mL
E-ELIR-0011 Sample Diluent 10mL, 100mL, 500mL

Citations

From now on, if you have published a paper by using any of our products since 1/1/2019, fill out the “Elabscience Publication Reward Application Form”carefully and send it to orders@elabscience.com, we will get back to you with the reward after we confirm it ASAP!

View more details about our Publication Reward >>

Reviews/Q&A

  • Show all
  • Reviews
  • Q&A
... Show All Show Less

People Also Bought

Apply for Free Shipping 24T ELISA Kit
*Product Name:
*Catalog Number:
Size:
*Name:
*Email:
*Phone:
*Message:
*Country:
How do you know
Elabscience:

*Verification code: