Current Position:Home>>Kits>>ELISA Kits>> Human IgG1(Immunoglobulin G1) ELISA Kit

Human IgG1(Immunoglobulin G1) ELISA Kit

Cat.No.:E-EL-H6185
Reactivity: Human

Filter:

ELISA

To Purchase E-EL-H6185

Size:

96T
48T
24T
96T*5
96T*10

Price: $495

Qty:

Welcome to order from local distributors.

Protocols for ELISA

FAQ for ELISA

Have Questions?

Add to cart Bulk request

For research use only. Order now, ship in 3 days

Product Details

Properties

Assay type	Competitive-ELISA
Format	48T/96T/96
Assay time	2.5h
Detection range	9.38-600 μg/mL
Sensitivity	5.63 μg/mL
Sample type &Sample volume	serum, plasma and other biological fluids; 50μL
Specificity	This kit recognizes IgG1 in samples. No significant cross-reactivity or interference between IgG1 and analogues was observed.
Reproducibility	Both intra-CV and inter-CV are < 10%.
Application	This ELISA kit applies to the in vitro quantitative determination of IgG1 concentrations in serum, plasma and other biological fluids.

Test Principle

This ELISA kit uses the Competitive-ELISA principle. The micro ELISA plate provided in this kit has been pre-coated with IgG1. During the reaction, IgG1 in the sample or standard competes with a fixed amount of IgG1 on the solid phase supporter for sites on the Biotinylated Detection Ab specific to IgG1. Excess conjugate and unbound sample or standard are washed away, and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well and incubated. Then a TMB substrate solution is added to each well. The enzyme-substrate reaction is terminated by the addition of stop solution and the color turns from blue to yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The concentration of IgG1 in tested samples can be calculated by comparing the OD of the samples to the standard curve.

Kit components & Storage

An unopened kit can be stored at 2-8℃ for 1 month. If the kit is not supposed to be used within 1 month, store the components separately according to the following conditions once the kit is received.

Item	Specifications	Storage
Micro ELISA Plate(Dismountable)	96T: 8 wells ×12 strips 48T: 8 wells ×6 strips	-20℃, 6 months
Reference Standard	96T: 2 vials 48T: 1 vial
Concentrated Biotinylated Detection Ab (100×)	96T: 1 vial, 120 μL 48T: 1 vial, 60 μL
Concentrated HRP Conjugate (100×)	96T: 1 vial, 120 μL 48T: 1 vial, 60 μL	-20℃(Protect from light), 6 months
Reference Standard & Sample Diluent	1 vial, 20 mL	2-8°C, 6 months
Biotinylated Detection Ab Diluent	1 vial, 14 mL
HRP Conjugate Diluent	1 vial, 14 mL
Concentrated Wash Buffer (25×)	1 vial, 30 mL
Substrate Reagent	1 vial, 10 mL	2-8℃(Protect from light)
Stop Solution	1 vial, 10 mL	2-8℃
Plate Sealer	5 pieces
Manual	1 copy
Certificate of Analysis	1 copy

Technical Data

Precision

Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level IgG1 were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level IgG1 were tested on 3 different plates, 20 replicates in each plate.

	Intra-assay Precision			Inter-assay Precision
Sample	1	2	3	1	2	3
n	20	20	20	20	20	20
Mean (μg/mL)	30.33	93.09	220.66	30.79	85.03	226.42
Standard deviation	1.84	4.69	9.36	1.95	4.35	9.87
CV (%)	6.08	5.04	4.24	6.32	5.12	4.36

Recovery

The recovery of IgG1 spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.

Sample Type	Range (%)	Average Recovery (%)
Serum(n=8)	91-104	98
EDTA plasma(n=8)	96-110	101
Cell culture media(n=8)	87-102	93

Linearity

Samples were spiked with high concentrations of Human IgG1 and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.

Target Information

Synonyms	IgG1
Research Area	Immunology

Assay Procedures

	1. Add 50μL standard or sample to the wells, immediately add 50μL Biotinylated Detection Ab working solution to each well. Incubate for 45 min at 37°C
	2. Aspirate and wash the plate for 3 times
	3. Add 100μL HRP conjugate working solution. Incubate for 30 min at 37°C. Aspirate and wash the plate for 5 times
	4. Add 90μL Substrate Reagent. Incubate for 15 min at 37°C
	5. Add 50μL Stop Solution
	6. Read the plate at 450nm immediately. Calculation of the results

Citations

Reviews/Q&A

Show all
Reviews
Q&A

... Show All Show Less

*Product Name:
*Catalog Number:
Size:
*Name:
*Email:
*Phone:
*Message:
*Country:
*When will you use it?	Within 1 month In 2 to 3 month In 4 to 6 month 6 months later
*Captcha:	Click to load Captcha